4G LTE Module Guide Board for Information Point, WF-G3600, AndroidSBC, Antwerp

TL;DR: 4G LTE Module Guide Board for Information Point

AndroidSBC peripheral desk: guide kiosk touch, scanner and printer driver SDK declared production-ready serving Antwerp, Belgium. The WF-G3600 smart guide kiosk Android motherboard spans the dual-screen smart guide terminal and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual independent HDMI plus LVDS, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Antwerp and Belgium importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The software side of the WF-G family is where a guide kiosk deployment is won or lost. AndroidSBC ships the boards on Android 10 through Android 15, plus Linux, Ubuntu and Debian images, with a common driver package for capacitive and IR touch controllers, barcode and QR engines, NFC readers, thermal printers, RFID readers, ID card readers, cameras and relay boards. A cloud content management client, a kiosk-mode lockdown layer and a staged OTA channel are part of the reference image, and the wayfinding and directory application interface is documented for integrators. For Antwerp and Belgium development teams the practical effect is that the board arrives as a platform, not as a blank SoC with a datasheet. Certification, carton labelling and palletisation for Belgium are prepared in Shenzhen by the export desk before the Antwerp shipment leaves, and the test reports stay versioned against the board revision.

WF-G3600 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3600 (dual-screen smart guide terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Belgium importers sourcing the WF-G family, the WF-G3600-A variant is the typical configuration for the mall directory and promotion terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Belgium Buyers

The first obstacle for Belgium buyers is specification drift. A datasheet says RK3588 or RK3568, but the board that shows up on the Antwerp loading dock has different memory, a different display interface or a different Android build than the sample that was approved.

Dual-screen behaviour is a factory-set option. The WF-G family supports independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, and AndroidSBC validates the panel pairing before the lot ships to Antwerp, with BIPT conformity and CE marking with BIPT radio interface registration documentation attached for Belgium importers at Port of Hamburg. For Antwerp and Belgium the Hamburg - Shenzhen lane remains the working option, and 64900 boards are booked on it as of September 18, 2026, the 3rd such release this cycle.

Competitive Comparison: WF-G3600 vs Competing Smart Guide Kiosk Android Boards

For Belgium buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. Antwerp integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Directory and wayfinding screens are being re-specified as content endpoints rather than as standalone displays. Grand View Research puts the global interactive kiosk market at USD 34.79 billion in 2024, and the segment analysis points to software as the fastest-growing component: the board in a dual-screen smart guide terminal build has to host the content client, the touch stack and the update channel, which is exactly what Belgium integrators in Antwerp are now writing into tenders.

• Mall floor directories and tenant finders: WF-G3600 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3288 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3288 and the industrial WF-G3399 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3399 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC tracks these numbers for Antwerp and Belgium planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.

Partner Success Story: Rheinland Orientierungs Systeme (wayfinding and orientation integrator)

A Rheinland Orientierungs Systeme programme in the Germany public buildings segment illustrates how the WF-G family from AndroidSBC supports Antwerp integrators on the ground. Rheinland Orientierungs Systeme rolled out 64900 WF-G orientation boards across municipal buildings, clinics and university campuses.

• OEM relationship: AndroidSBC private-label SKU shipped with Rheinland Orientierungs Systeme branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BIPT conformity, all bundled into the Shenzhen source-factory shipment.

As Rheinland Orientierungs Systeme Technical Director for Germany Public Buildings explained: Rheinland Orientierungs Systeme builds for public procurement, where the file set matters as much as the silicon, and the WF-G board arrived with the Belgium conformity dossier that let 64900 units clear acceptance in Antwerp on the first submission.

Field Report: directory and promotion terminal deployment at a downtown retail complex

LONGGANG, Shenzhen, September 18, 2026 - Cen Rui, AndroidSBC field desk. Each WF-G3600 board logged 20000 simulated directory searches and route queries on the test jig before the lot was cleared for Belgium shipment. The WF-G3600 smart guide kiosk Android motherboard order for Antwerp, Belgium cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-G3600 dual-screen smart guide terminal production lot includes the WF-G3600-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Belgium integrators, the BIPT conformity plus CE marking with BIPT radio interface registration paperwork is bundled.

Filed by Cen Rui, AndroidSBC field desk, LONGGANG, Shenzhen. Belgium integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3600 Application Scenarios

The WF-G3600 dual-screen smart guide terminal sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3600-A configuration is the typical build for the mall directory and promotion terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3600 plus WF-G1330 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1331 plus WF-G3600 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G6180 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G5270 plus WF-G1330 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1331 plus WF-G5270 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1330 plus WF-G6180 carry the guest orientation flow in Antwerp.
• Exhibition and museum interpretive display points: WF-G3600 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G5270 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Antwerp: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Antwerp Buyers

AndroidSBC runs three entry tracks for Antwerp and Belgium partners, and the WF-G family is available on all three from the same source factory.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The practical benefit for Antwerp and Belgium is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen guide terminal?

Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships dual-screen guide terminal as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the dual-screen guide terminal firmware baseline with the peripheral driver SDK bundled.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: There are eight silicon options in the WF-G family and RK3568 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Belgium integrators can mix tiers inside one venue estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Belgium?

Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with BIPT plus CE marking with BIPT radio interface registration for Belgium, so Antwerp integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Belgium deployments.

How are software updates and long-term support handled on the WF-G family?

Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so a Belgium deployment can be managed as a fleet rather than as a set of screens.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Antwerp partners, with carton labelling, palletisation and the BIPT plus CE marking with BIPT radio interface registration paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Antwerp and Belgium partners under the supply agreement.

Contact AndroidSBC: Start Your WF-G3600 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Antwerp integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Antwerp and Belgium buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.